28 May 2018

How to Crack WEP, WPA, & WPA2 Wireless with BackTrack 4 R2 & WiFite r68

I have previously posted an article on How to Crack WEP, WPA, & WPA2 Wireless with BackTrack4 (GUI Edition) using GRIM WEPA.

In this article I am going to show you how to crack a wireless network using “WiFite r68″. Unlike “GRIM WEPA” you can attack multiple networks at the same time with “WiFite r68″, and it is more considered more “automated”, where it does try different methods of crack in case one fails.

Before you begin

  1. You need to have BackTrack 4 R2 installed and running on VMWare Player. How to Install VMWare & Backtrack 4 R2
  2. Check if your wireless adapter is compatible with Backtrack from List of compatible adapters
  3. I am using the Alfa AWUS036H which is a very well known usb wireless adapter because of its good performance and cheap price.
  4. Make sure that your wireless adapter is plugged into your virtual machine. In VMWare goto the menu “Virtual Machine” -> “Removable Devices” -> “YOUR ADAPTER MUST BE TICKED”

Downloading & Installing WiFite r68

  1. Downloading “WiFite r68″: Goto http://code.google.com/p/wifite/ and download “wifite_r68.py”Wifite - Download
  2. Copy the file (wifite_r68.py) into the virtual machine by dragging & dropping it into the virtual machineWifite - Drag Vmware

Cracking the Wireless Network

  1. Launch Konsole and run the following command
    ./python wifite_r68.py

    Wifite - Run

  2. Select the settings that you wish to use.
    “interface”: is your wireless adapter.
    “encryption type”: WEP encryption is much easier to crack and doesn’t need a dictionary file, so it’s better to start with WEP.
    “channel”: make sure “all channels” is checked (colored red)
    “select targets from list” or “everyone”: “everyone” will try to crack any wireless router that it finds; “select targets from list” will ask you which router to attack.
    “minimum power”: 50 is ok.
    “dictionary”: is list of words that are tried while cracking a WPA or WPA2 protected network.
    “wep timeout” & “wpa timeout”: 10 & 5 should be ok.
    “wep options”: method of attacking. Select all 4 options (arp-replay, chop-chop, fragmentation, -p 0841)
    “change mac”: changes the mac address of your wireless adapter.
    “ignore fake-auth” & “anonymize all attacks”: keep them unchecked.
    “packets/sec”: keep it at 500.
  3. Now click the “h4x0r 1t n40″ and wait until the networks are displayedWifite - Searching Networks
  4. In case you selected “select targets from list” in the options before you start, then you will asked to select the network(s) to attack, otherwise if you selected “everyone” then the attack will start automatically.
  5. One attack method might work on one network but not the other. So different attack methods will be tried in case one fails (3 attack methods failed in my case but the “-p0841″ attack succeeded)
  6. The cracked key(s) will be displayed on the screen and stored in a file called “log.txt”Wifite - Cracked Network
  7. Wait until the end or press “Ctrl+C” to stop the attack

As mentioned in my previous articles that cracking a WPA or WPA2 network is directly related to the complexity of the password and the dictionary file that you are using. This means that you might be able to crack the password in a matter of seconds or not crack it at all. You can download dictionary files from the internet.

Conclusion

Wifite-r68 is very user friendly and more automated than manual cracking or “GRIM WEPA” cracking. If you failed to crack a WEP network using “Wifite-r68″ you can always try GRIM WEPA.

Feel free to ask questions or let me know if I have missed something by leaving a comment below.

References

How to Crack WEP, WPA, & WPA2 Wireless with BackTrack4 & GRIM WEPA

Main article: How to Protect Your Wireless Network

I have previously posted 2 articles on:

  1. How to Crack WEP Wireless with BackTrack 4 running on Windows
  2. How to Crack WPA & WPA2 Wireless with BackTrack 4 running on Windows

This article explains how to crack a WEP, WPA, or WPA2 using a Graphical User Interface (GUI) instead of writing codes. I would recommend that you check out the previous articles to understand the steps involved in the process.

Before you begin

  1. You need to have BackTrack installed and running on VMWare Player. How to Install VMWare & Backtrack 4
  2. Check if your wireless adapter is compatible with Backtrack 4 from List of compatible adapters
  3. I am using the Alfa AWUS036H which is a very well known usb wireless adapter because of its good performance and cheap price.
  4. Make sure that your wireless adapter is plugged into your virtual machine. In VMWare goto the menu “Virtual Machine” -> “Removable Devices” -> “YOUR ADAPTER MUST BE TICKED”

Downloading & Installing GRIM WEPA

First, we need to download and install “GRIM WEPA” inside Backtrack 4:

  1. Download: Goto http://code.google.com/p/grimwepa/ and download “grimstall.sh” & the latest version of “grimwepa”. In my case: it is “grimwepa_1.0.jar”
    GRIM WEPA - Download
  2. Copy the files into the virtual machine by dragging & dropping them into the virtual machine
    GRIM WEPA - Copy to VM
  3. Launch Konsole and run the following command
    ./grimstall.sh install /pentest/wireless/grimwepa/

    GRIM WEPA - Install

Running GRIM WEPA

Run:

grimwepa

  1. Select the wireless interface that you want to use to put in monitor mode. In my case: wlan0
    GRIM WEPA - Start
  2. Select the monitoring interface from. In my case: mon0
  3. Make sure “All Channels” is checked
  4. Hit “Refresh Targets” until the list of available networks appear.
  5. Hit “Stop scanning”
  6. Select the network that you wish to crack

Cracking a WEP Network

If the network that you have selected is WEP encrypted then follow these steps:

  1. Select “ARP-Replay” as the Attack method
  2. Tune the Injection rate to “600”
  3. Click “Start Attack” (if Captured IVs doesn’t increase then restart the attack)
  4. Cracking will automatically start when number of IVs collected reach 10,000. In case it wasn’t able to crack it at 10,000 then it will keep collecting more IVs and try to crack
  5. In the end it should show you the WEP key in the status bar as shown below

GRIM WEPA - WEP Cracked

Cracking a WPA/WPA2 Network

If the network that you have selected is WPA or WPA2 encrypted follow these steps:

  1. Click “Start Deauth + Handshake Capture Attack”. You need someone who is already using the wireless network that you are attacking, or you have to wait until someone connects to it. So you might need to keep it running for some time
    GRIM WEPA - WPA2 Start Handshake Capture
  2. Wait until you see “Handshake was captured!” GRIM WEPA - WPA2 Handshake Captured
  3. Now select the dictionary file that you wish to use to crack the password and click “Crack WPA (Dictionary Attack)”
  4. In case the password wasn’t cracked then you need to try another dictionary file
  5. In case the password was cracked then you should see it in the status bar as shown below GRIM WEPA - WPA2 Password Cracked

As mentioned in my previous articles that cracking a WPA or WPA2 network is directly related to the complexity of the password and the dictionary file that you are using. This means that you might be able to crack the password in a matter of seconds or not crack it at all.

Conclusion

GRIM WEPA is a GUI application used to automate the process of cracking a WEP, WPA, or WPA2. Cracking a WEP protected wireless network is almost guaranteed to succeed, easy, and fast to achieve. The success of cracking a WPA or WPA2 wireless network is directly related to the complexity of the password and the dictionary file that you’re using.

This is why you should set your home wireless network to be WPA2 protected with a long password that contains a variety of letters, capital letters, numbers, and symbols. Check How to Protect Your Wireless Network for more details.

Feel free to ask questions or let me know if I have missed something by leaving a comment below.

References